In short:
- Dashleigh's 10 ml roller bottle labels are 2.2 x 1.7 in., about 5.6 x 4.3 cm;
- on a standard 10 ml roller they wrap almost all the way around and leave a small gap at the back;
- a 5 ml roller is too small for that size and takes a 2.6 x 0.75 in. band instead.
Roller bottles are tiny, so a label that's a tenth of an inch off either wrinkles over the shoulder or leaves an awkward strip of glass. This guide gives you the standard 10 ml roller bottle label size in inches and centimeters, a quick way to check your own bottles, and the order to do things in so the label survives oily fingers.
What size label fits a 10 ml roller bottle?
Dashleigh's 10 ml roller bottle labels are 2.2 x 1.7 in. (about 5.6 x 4.3 cm). On a standard 10 ml glass roller the 2.2 in. width goes almost all the way around and stops just short at the back. That small gap is deliberate: a label that has to meet itself exactly is hard to put on straight by hand, and a near-wrap hides the seam problem completely. The 1.7 in. height sits on the straight part of the bottle between the shoulder and the base.
| Bottle | Label size | Template |
|---|---|---|
| 10 ml roller bottle or roll-on perfume | 2.2 x 1.7 in. (5.6 x 4.3 cm) | 8383 |
| 5 ml roller bottle | 2.6 x 0.75 in. | 8445 |
| 10 ml dropper bottle or vial | 2.375 x 1.25 in. | 8389 |
| 10 or 15 ml dropper, slim band | 3 x 1 in. | 8384 |
Will it fit your rollers?
Standard 10 ml glass rollers, roll-on perfume bottles and 10 ml vials with the same straight sides all take the 2.2 x 1.7 in. label. Before you print a full batch, check one bottle: the straight wall should be at least 1.7 in. tall, and a strip of paper wrapped around it should measure a little over 2.2 in.
5 ml rollers and 1 to 2 ml sample vials are shorter and narrower, and a 10 ml label will hang off them. A 5 ml roller takes a narrow band about 2.6 x 0.75 in. (Dashleigh template 8445).
Which material holds up to essential oils?
Rollers get handled constantly, and the oil ends up on the outside of the glass sooner or later. For a blend you use every day, pick a film:
- Waterproof white vinyl if you print on an inkjet;
- waterproof white polyester if you print on a laser.
Clear gloss gives a printed-on-glass look on amber or clear rollers (dark type only, since printers can't print white). Brown kraft and 100% recycled white are uncoated paper. They look lovely on gift sets, but oil will mark them, so keep them for bottles that are given away or stay dry.
How to label a roller bottle, step by step
- Design for the front inch. Open template 8383 in Canva, or download it for Word, Pages, PDF or JPG. Only about the center inch of the label faces you, so put the blend name there ("Sleep", "Focus", "Calm") and run the oils, dilution and directions around the sides.
- Stretch the background. These labels print to the edge. Pull your background color a little past the label outline so a millimeter of printer drift doesn't leave a white sliver.
- Test on plain paper at 100% scale (not "fit to page"), hold it against a label sheet to the light, and adjust if the lines don't match. Our alignment guide walks through the fixes.
- Print and wait. Inkjet ink on vinyl needs 10 to 15 minutes to set before you peel.
- Label clean, dry glass. Fill and cap the bottle first, then wipe the outside with a little rubbing alcohol so no oil is left where the label goes.
- Apply from the front. Center the label on the front, press, and roll the bottle on the table toward the back so it smooths out without bubbles.
- Give it a day. The adhesive bonds fully in about 24 hours. After that it can take oily fingers.
How many labels do you need?
Fifteen fit on a sheet, so a 5-sheet pack labels 75 rollers. That's a set of blends for the whole family with reprints to spare, a run of samples for a market table, or a batch of teacher or bridesmaid gifts. Labelling a full product line? Several packs bring the multi-pack discount in the cart.
Free designs and related sizes
Ready-made roller bottle designs are free on the free label designs page. For the rest of a small-batch line, the lip balm labels and 3 x 1 in. essential oil labels use the same waterproof vinyl. Not sure which small-bottle size you need? Our essential oil bottle label size guide compares them, and every roller size is on the roller bottle labels page.
For standard 10 ml rollers, start with the 2.2 x 1.7 in. roller bottle labels in waterproof white vinyl.
